HEADLIGHT ADJUSTMENT
1. Shut off engine.
WARNING
To prevent serious injury, NEVER attempt to adjust the headlight while the
engine is running.
2. If adjustment is necessary, an adjuster knob is located on the back of the
headlight, which can be accessed by removing the vehicle’s left side panel.
NOTICE
The adjuster knob is located at the rear of the light above the plug.
3. To LOWER the beam, turn the adjuster knob CLOCKWISE.
4. To RAISE the beam, turn the adjuster knob COUNTERCLOCKWISE.
TOOLS
Remove the hood assembly to
access the spare drive belt
container
q
. The spare drive
belt container is attached to the
front bumper and holds the
spare belt, spare spark plugs,
and spark plug wrench.
NOTICE
Spare belt and spark plugs are not provided with the snowmobile.
L-WRENCH
When properly engaged in the bracket,
the L-wrench
w
secures the fender to
the console. To retrieve the L-wrench,
rotate it counter-clockwise and slide it
upward from the bracket. Return the
L-wrench to the bracket and rotate it
clockwise when not in use.
37
FEATURES
To Next Page
Loading...
Need help?
General
