6. Press and release the SET button to increase the 3rd digit.
7. Press and hold the SET button to accept the 3rd digit and submit code.
If code is correct, SECURITY OFF will appear in the information display area
NOTICE
The system is now unlocked.
If code is incorrect, BAD CODE will appear in the information display area.
Return to step 1 to re-enter code.
CHANGING TO A NEW SECURITY CODE
Any time you wish to change your current security code to a new code, perform
TASK 2 through TASK 4 of the First Time Use of Your Security System
procedure. Instead of using the factory default code “000” in TASK 2 and TASK
3, use your current security code.
60
GAUGE
To Next Page
Need help?
General
