SECURITY SYSTEM ACCESS QUICK REFERENCE
Now that you have become familiar with the procedure for locking and unlocking
the system, use the chart below as a quick reference.
SECURITY SYSTEM ACCESS QUICK REFERENCE CHART
ACTION RESULT
1. Start engine
2. Press and hold the center
button
3. Press and release the SET button
until SECURITY appears in
information display area.
4. Press and release SET button.
Displays ENTER CODE (to lock
the system)
Press and release the SET button Advances a digit on the ENTER
CODE screen
Press and hold the SET button Accepts a digit and displays the
next digit position (if any remain)
on the ENTER CODE screen
While SECURITY OFF is shown on the
information display area, simultaneously
Press and hold the MODE and SET
button.
Allows user to change security
code.
DIAGNOSTIC DISPLAY MODE
The diagnostic display mode is for
informational purposes only. Your
POLARIS dealer can perform all major
repairs.
The diagnostic mode is accessible only
when the check engine warning
indicator is illuminated and a diagnostic
code is active.
Do not stop the engine if you want to view the active code (failure code). Active
codes cannot be retrieved if power is interrupted to the instrument cluster. The
codes will become inactive codes if power is interrupted. Inactive codes are
stored in the history of the unit. Please see your POLARIS dealer can help
retrieve inactive codes.
Use the following procedure to view active codes.
61
GAUGE
To Next Page
Loading...
Need help?
General
