EasyManuals Logo
Home>Polaris>Swimming Pool Vacuum>Alpha iQ+

Polaris Alpha iQ+ User Manual

Polaris Alpha iQ+
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Page 26
English
Common iAquaLink
Troubleshooting
Remember, if you get a new Wi-Fi Router, reset the defaults of your current Wi-Fi Router or simply change
your Wi-Fi network password, you will have to re-establish the connection between your cleaner and the
router. (See: Congure the System.)
User Issue Possible Cause Suggested Solution
All lights are o󰀨 Bright sunlight Shield the lights to block sunlight and re-check if
the lights are lit.
Control box is unplugged. Plug the control box into a GFCI outlet
(see: Connect to a Power Source).
Power outage. Verify that the breaker is on and electricity is
being supplied to the outlet.
Lost internet connection. Check internet connection - Network may be
down.
Wi-Fi is o󰀨 Router is o󰀨. Turn router on.
Router password was changed. Reset router with new password.
Wi-Fi light is ashing Lost internet connection Check internet connection - Network may be
down.
Control box is too far from home
router
Relocate the control box as near to the home
router as practical. (See: Install and Submerge
the Cleaner) Do not use an extension cord.
Weak Wi-Fi signal Check for adequate Wi-Fi signal strength.
With a Windows laptop, go to Network
Connections in the Control Panel. Check
Signal Strength meter under Wireless
Network Connection icon while standing near
the control box.
With a smart device, search for, download,
and use an app that can check signal
strength while standing near the control box.
If Wi-Fi signal is weak, consider installing a
Wi-Fi extender.
Connectivity issue with local Wi-Fi or
connection to the server.
Contact your local internet service provider.
Unplug your control box and wait 10
seconds. Plug in the box again and see if
lights illuminate.
Check Internet connection - Network may be
down.
Wi-Fi light is on but buttons
and functions are disabled
Firmware update in progress. "PROG" displays on the control box and
information is displayed in the app during an
over-the-air rmware update. Simply wait
for button functions to resume after update
completes. Do not unplug from power during an
update.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Alpha iQ+ and is the answer not in the manual?

Polaris Alpha iQ+ Specifications

General IconGeneral
BrandPolaris
ModelAlpha iQ+
CategorySwimming Pool Vacuum
LanguageEnglish

Related product manuals