61
Features and Controls
Master Cylinder/Brake Fluid
Check the brake fluid in the master cylinder before each ride. If the fluid level is low add
DOT 4 brake fluid only. Do not overfill. See page 186 for the part numbers of Polaris prod-
ucts.
NOTE: When checking the fluid level, the ATV must be on level ground with the handlebars straight.
Hand Brake Fluid Level
View the fluid level through the indicator window
on the side of the master cylinder. Maintain the
fluid level at or slightly above the mark near the
center of the sight glass. Do not overfill.
Foot Brake Fluid Level
The brake fluid reservoir is located under the seat.
Maintain the fluid level between the maximum
and minimum marks.
Fluid Level Mark
To Next Page
Loading...
Need help?
General
