PRE-RIDE INSPECTION
WARNING
Failure to inspect and verify that the vehicle is in safe operating condition
before operating increases the risk of an accident. Always inspect the vehicle
before each use to make sure it's in safe operating condition.
ITEM REMARKS PAGE
Brake system/pedal travel Ensure proper operation page 124
Brake fluid Ensure proper level page 124
Front suspension Inspect, lubricate if necessary page 103
Rear suspension Inspect, lubricate if necessary page 103
Steering Ensure free operation -
Tires Inspect condition and pressure page 128
Wheels/fasteners Inspect, ensure fastener tightness page 128
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Drive Belt Inspect, ensure installed correctly -
Fuel and oil Ensure proper levels page 104
Coolant level Ensure proper level page 112
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation page 42
Indicator lights/switches Ensure proper operation page 51
page 40
Intake pre-filters Inspect, clean -
Headlamps Check operation, apply POLARIS dielectric
grease when lamp is replaced
page 130
Brake light/tail lamps Check operation -
Seat Latch Push down on the seat back to ensure the latch
is secure
-
Seat Belt Check length of belt for damage, check latches
for proper operation
page 46
70
OPERATION
To Next Page
Loading...
Need help?
General
