Polaris RANGER 150 EFI 2020 User Manual

6. If hub nut was removed, install a new cotter pin after the hub nut has been
tightened. If the holes do not line up, turn the hub nut until the cotter pin
r
can be installed.
LIGHTS
DAYTIME RUNNING LIGHT REPLACEMENT
To remove the headlight, do the following:
1. Disconnect the headlight to harness connection
q
.
2. Remove the three fasteners
w
retaining the headlight.
3. Remove the headlight from the inside of the front bumper.
94
MAINTENANCE

Polaris RANGER 150 EFI 2020 Specifications

General

Brand	Polaris
Model	RANGER 150 EFI 2020
Category	Offroad Vehicle
Language	English