20
FEATURES AND CONTROLS
Console
Auxiliary Outlet
The 12-volt receptacles have spade connections on the back that may be used to power an
auxiliary light or other optional accessories or lights. The connections are behind the con-
sole, under the dash.
Mode Button
The yellow button located near the instrument cluster is used to toggle through mode
options. See pages 26-29.
Gear Selector
Use the gear selector to shift gears. Low gear is the primary driving range for the RANGER.
High gear is intended for use on hard-packed surfaces with light loads. To shift gears, brake
to a complete stop. When the engine is idling, move the lever to the desired gear.
NOTICE: Shifting gears with the engine speed above idle or while the vehicle is moving could cause
transmission damage. Always shift when the vehicle is stationary and the engine is at idle.
Tip: Maintaining shift linkage adjustment is important to assure proper transmission function. See your
dealer if you experience any shifting problems.
To Next Page
Loading...
Need help?
General
