31
FEATURES AND CONTROLS
Switches
Headlight Switch
Use the headlight switch to turn the lights on and
off and to change the lights from high beam to low
beam. The ignition switch must be in the ON posi-
tion to operate the headlights.
Press the top of the rocker switch toward the dash
to place the headlights on high beam. Move the
rocker switch to the center position to place the
headlights on low beam. Press the bottom of the
rocker switch to turn off the headlights.
All Wheel Drive (AWD) Switch
The AWD Switch has two positions:
• All Wheel Drive (AWD)
• Two Wheel Drive (2WD).
Press the top of the rocker switch to engage All
Wheel Drive. Press the bottom of the switch to
operate in two wheel drive.
See page 40 for AWD operating instructions.
HIGH
LOW
AWD
2WD
To Next Page
Loading...
Need help?
General
