31
FEATURES AND CONTROLS
Switches
Ignition Switch/Light Switch
Use the ignition switch to start the engine
and to turn the lights on or off. The key
can be removed from the switch when it is
in the OFF position.
All Wheel Drive (AWD) Switch (if equipped)
The AWD Switch has two positions:
• All Wheel Drive (AWD)
• Two Wheel Drive (2WD).
Press the top of the rocker switch to engage All
Wheel Drive. Press the bottom of the switch to
operate in two wheel drive.
See page 35 for AWD operating instructions.
Auxiliary Outlet
The vehicle is equipped with a 12-volt accessory outlet on the dash. Use
the outlet to power an auxiliary light or other optional accessories or
lights. For service, the dash outlet connection is under the dash.
OFF Turn the key to the OFF
position to stop the engine.
Electrical circuits are off.
LIGHTS ON The lights are on. Electrical
circuits are on. Electrical
equipment can be used.
LIGHTS OFF The lights are off. Electrical
circuits are on. Electrical
equipment can be used.
START Turn the key to the START
position to engage the
electric starter. See page 52
for starting procedures.
To Next Page
Loading...
Need help?
General
