EN-16
Flash mode Description
Flash Off
Auto
Always On
Use this mode in the environment where flash use is prohibited or
should the subject be too far away for the flash to have any effect.
The flash fires automatically according tothe surrounding brightness
of the photographic conditions.
The flash will always fire regardless of the surrounding brightness.
Select this mode for recording images with high contrast
(subject backlit) and heavy shadows.
CAPTURE MODE
Capturing Images
Your camera is equipped with a 2.4" full color LTPS-TFT LCD display to help you compose images,
playback recorded images/video clips or adjust menu settings.
1. Press the Power button to turn the power on.
2. Frame your image on the LCD display so that the main
subject is within the focus frame.
■ Pressing the ▲ button zooms in on the subject, and
enlarges the subject on the LCD display.
3. Press the SHUTTER button to capture your image.
Using the Flash
The flash is designed to function automatically when lighting conditions permit the use of flash.
The camera has 3 flash modes: Off, Auto , and Always On. You can take an image using
a desired flash mode to suit your circumstances. The flash's effective range is
35.4” ~ 59.1”(0.9m~1.5m) (in Normal mode).
The flash is disabled if the camera is set to Macro mode.
1. Press the button to turn the camera on.Power
2. Toggle until your desired flash mode appears on the LCD display.
3. Compose your scene and press the button SHUTTER
to capture your image.
The table below will help you to choose the appropriate flash mode:
To Next Page
Loading...
Need help?
General
