ENGLISH
27
Chapter 2 Installing the LCD TV
Use an audio cable to connect the audio receiver’s audio LINE IN jacks to LCD TV’s
DIGITAL OUT jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
Connecting an Audio Receiver or a Digital System
For better sound quality, you may want to use a Home Theater/Stereo System.
NOTE: If you have a Home Theater/Stereo System that you would like to use with your new
Polaroid TV, we recommend that you do NOT use your TV’s audio output for this connection. For the
best sound quality, our product testing has shown that you should connect your Home Theater/
Stereo System directly to your A/V device. I.E. You should connect your Home Theater/Stereo
System to your DVD player, Cable/Satellite box or other AV equipment.
Although not recommended, if you prefer to use the TV audio output to make this connection to your
Home Stereo System, please follow the instructions below.
AUDIO Cable
Audio Receiver
HDMI IN
LR
LR
PC VGA IN
PC AUDIO IN
SCART
VIDEOS-VIDEO
DIGITAL OUT
AUDIO IN
AUDIO IN
VHF/UHF IN
YPbPr
Rear of TV
To Next Page
Loading...
Need help?
General
