ENGLISH
37
Chapter 3 Using the OSD Features
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the VGA Setup.
Use the ▲▼ buttons to highlight an individual VGA Setup option, use the ◄► buttons
to change the setting, and press the MENU to exit the menu
The VGA Setup menu includes the following options:
Auto Adjust Press the OK button to automatically adjust the display settings to
optimize performance based on the VGA mode.
H-Position Adjusts the position of the picture left and right in the window.
V-Position Adjusts the position of the picture up and down in the window.
Clock Controls the width of the picture based on the VGA mode.
.
Phase Controls the signal phase, which can improve focus clarity and image
stability based on the VGA mode.
Customizing the VGA Settings
VGA Setup
Auto Adjust ►
H-Position 50
V-Position 50
Clock 50
Phase 32
Move Select Exit
To Next Page
Loading...
Need help?
General
