3. The LCD screen shows “PLAY AVI YES NO” indicating whether to play the
latest video clip or not. Press the OK button to play the latest video clip.
4. You also can use the Down button to select “NO”and press the OK
button to cancel playing the latest video clip. Then use the Up and
Down buttons to select the video clip you want to playback.
NOTE:
There is no sound during video playback as it has no built-in speaker.
• Protecting/Unprotecting Audio Clip(s) and Video Clip(s)
Following the steps below to protect an Audio Clip:
1. Turn on the camera.
2. Set the Mode selector to Playback mode (the Status LED blinks
once).
3. Use Previous or Next button to select the audio clip you want to
protect.
Press
Press
Press
Press
NOTE:
When an Audio clip is protected, the
icon will appear. To unprotect the
protected Audio clip, please repeat the above steps and select “UNLOCK”.
The
icon will appear.
To Next Page
Loading...
Need help?
General
