29
LANGUAGE SETUP
You can change the default settings of this unit to customize its performance to your own
preference.
Note: Set the system up while playback is stopped completely or there is no disk in the
player.
To set up your system:
1. Press the SETUP button and the setup menu will appear on the screen. It includes
LANGUAGE SETUP, PREFERENCE, and TVGuardian.
2. Press the direction buttons to select a sub-menu to set up and then press the
ENT/ENTER button to access. In the sub-menu, use the button to highlight the
“MAIN PAGE” and press the ENT/ENTER button to exit.
3. Press the SETUP button again to exit setup menu at any time during setting.
System Setup
1. OSD Language
This item is used to set the OSD (on-screen
display) language.
Press the or button to highlight this item.
Press the button to access.
There are several languages for you to choose.
Press the or button to choose the proper
one.
Press the ENTER/ENT button to confirm your
selection.
Press the button to exit this item.
Press the SETUP button and then screen will
display as the left.
To Next Page
Loading...
Need help?
General
