Example for Hostname using HTTPS:
https://username:password@abc.bicomsystems.com/prov/phone$mac.cf
g,tls-profile=1
Example for IP Address using HTTP:
http://username:password@192.168.1.10/prov/phone$mac.cfg
Example for IP Address using HTTPS:
https://username:password@192.168.1.10/prov/phone$mac.cfg,tls-profi
le=1
Replace username and password with Auto Provisioning username and password.
■
Example for Hostname using TFTP:
tftp://voip.bicomsystems.com/phone$mac.cfg
Example for IP Address: tftp://192.168.1.10/phone$mac.cfg
Click on Submit button then Reboot button.
■
Auto provisioning process will start during phone reboot process, phone will pickup
■
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.
Using TLS
NOTE: If you choose to use HTTPS as a protocol for registering your device, you will need to
To Next Page
Loading...
Need help?
General
