Poly Rove Series User Manual

Poly Rove Manual Provisioning
Objective
Manual provisioning of Poly Rove series DECT phones for the 8x8 Work service.
Applies To
• Poly Rove B2
Procedure
Note: If you need to reset your Poly Rove to its factory default settings, follow the steps in the Restore Factory Default
Settings section first, and then provision your phone.
Provisioning
First, you'll need to obtain the local (internal network) IP address of your phone:
1.
Connect the phone to your local network and power it up.
2. Once the phone boots up, press the Menu Button
https://support.8x8.com/equipment-devices/phones/poly/Poly_Rove_Manual_Provisioning
Updated: Mon, 03 Oct 2022 19:31:49 GMT
Powered by
1

Poly Rove Series Specifications

General

Wideband Audio	Yes
Speakerphone	Yes
Caller ID	Yes
Call Waiting	Yes
Connectivity	DECT
Conference Calling	Yes
Power Source	Rechargeable battery