Place a Video Call
Entering a Name or Number
1 Select from the Home screen, or just start
entering the number on the remote control.
2 Enter the IP address, SIP address, or H.323
name. Include the dots in an IP address. To
enter text, use the onscreen keyboard.
3 Select Call or press on the remote control.
Using Contacts
1 Select > Place a Call > Contacts.
2 Highlight the contact you want to call. You can
navigate to the contact or use the Search field.
3 Select Call or press on the remote control.
Using Recent Calls
1 Select > Place a Call > Recent Calls.
2 Highlight the entry you want to call.
3 Select Call or press on the remote control.
Using Speed Dial
To call a speed dial contact from the Home screen,
highlight it and press on the remote control.
Using the Calendar
If your system is configured to use the Calendar
widget, you can join a video meeting by clicking the
meeting in the Calendar.
Answer a Call
Select Answer or press on the remote control.
End a Call
1 Press on the remote control.
2 If prompted, confirm that you want to hang up.
Mute Your Microphone
Press on the remote control or on the table
microphone.
Enter letters or numbers
In camera control mode, move the
camera to a stored preset
In camera control mode, press and
hold a number to store a preset
Place or answer a call
For more information about setting up and using the system, refer to the Support pages at support.polycom.com.
Decrease the speaker volume
Display the Menu screen
Press Menu, then Select, to turn the
last used Content source on or off
Zoom the camera out
Mute a microphone
Delete letters or numbers or go
back to a previous screen
End or reject a call
Select button - Select
highlighted menu item
Navigate through menu items using
the Up, Down, Left, and Right buttons;
pan/tilt the camera
Return to the Home screen
Zoom the camera in
Increase the speaker volume
Quick Tips for the Polycom RealPresence Group Series
Generate touch (DTMF) tones
To Next Page
Need help?
General
