Hardware Installation Guide for the Polycom SoundStructure C16, C12, C8 and SR12
1 - 2
Product Features
The Polycom SoundStructure C16, C12, C8 and SR12 offer the following
features:
• 16 (C16), 12 (C12 and SR12), or 8 (C8) balanced Microphone/line-level
inputs
• 48 V phantom power available on all inputs
• 16 (C16), 12 (C12 and SR12), or 8 (C8) balanced line-level outputs
• Rear-panel Ethernet and RS-232 interfaces
• Optional telephone interface cards
• High-speed OBAM link to connect up to eight SoundStructure devices
(requires firmware v1.1 or higher)
• High-speed link to connect directly to Polycom HDX video codecs
Installation Overview
To prepare for the installation of the Polycom SoundStructure hardware:
• Review the safety information in Safety Recommendations on page 1-5,
and in Regulatory Notices And Warranty Information on page 6-1.
• Unpack the hardware carefully. The contents included in the shipping
container are listed in the next section, Package Contents, and Tools
Needed For Installation on page 1-5. If any components are missing,
contact your Polycom reseller.
To Next Page
Loading...
Need help?
General
