PowerTech KIT PL1000 User Manual

5
INSTRUCTIONS PL600/PL1000
2.3.3 PH-1 Photocells
The pair of PH-1 photocells has to be installed on the
wall and connected to the control panel. The function of
the photocells is to detect the obstacles found on the
optical axis between the transmitter (TX) and the
receiver (RX).
Figure 5
TX RX
2.3.4 PR-1 Radio Transmitter
PR-1 radio transmitter is used for the remote control of
the gate movement. To use the transmitter, press and
hold the button for 1 second. There are two buttons on
the transmitter and (A) button is “open-stop-close
mode” and (B) button is “pedestrian mode”.
2.3.5 PF-1 Flashing Light
PF-1 flashing light is controlled by PL600/1000 control
unit and blinks when the gate is moving or blinks 3
seconds before the gate moves. The flashing light stops
blinking when the gates
Table 2: List of small parts for PPB-1 Quantity
3*20 Screw
3 pcs
Nylon screw anchor
3 pcs
2.3.6 PKS-1 Key selector
The PKS-1 key selector is used for opening the gate
outdoors without the radio transmitter. PKS-1 key
selector is supplied with two keys
Table 3: List of small parts for PKS-1 Quantity
3*20 Screw
3 pcs
Nylon screw anchor
3 pcs
Keys
3 pcs
2.3.7 PPB-1 Push Button
The PPB-1 push button is used for opening the gate
indoors without the radio transmitter.
Figure 6
Figure 7
Figure 8
Figure 9
Table 4: List of small parts for PPB-1 Quantity
3*20 Screw
3 pcs
Nylon screw anchor
3 pcs

PowerTech KIT PL1000 Specifications

General

Brand	PowerTech
Model	KIT PL1000
Category	Gate Opener
Language	English