INSTRUCTIONS PL600/PL1000
Logic F3-1 The reactions of the photocells when detecting obstacles
Reloads automatic closing time
Reloads automatic closing time
Locks and, on release, reverses to open
Locks and, on release, continues opening
Logic F3-2 The reactions of the safety edge/ photocell when detecting obstacles
Reloads automatic closing time
Reloads automatic closing time
Reverses to open for 2 seconds
Reverses to close for 2 seconds
Logic F3-3 The reactions of the loop detector/ photocell when detecting obstacles
Reloads automatic closing time
Reloads automatic closing time
4.2.1 Programmable Functions of LED Display
LED Display Programmable Functions
“N-L”: The PL600 system learning is not done.
“RUN”: The PL600 system is in normal performing.
“LEA”: Enter learning mode and then wait for learning instructions.
The operation of gate learning:
(1). Press “SET” one time; then press “SET” + “DOWN” for 3seconds, and the LED display
shows “LEA” ; and then press the transmitter (A) button one time. After 1~3seconds, the LED
display shows “ARN”
“ARN”: The system learning is in progress.
The Auto-learning process of gate moving: “Gate open to the end- stop close to the end- stop.
To Next Page
Loading...
Need help?
General
