EasyManuals Logo
Home>ProForm>Elliptical Trainer>SMART STRIDER

ProForm SMART STRIDER User Manual

ProForm SMART STRIDER
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
21
Inspect and tighten all parts of the elliptical regularly.
Replace any worn parts immediately.
To clean the elliptical, use a damp cloth and a small
amount of mild soap. IMPORTANT: To avoid damage
to the console, keep liquids away from the console
and keep the console out of direct sunlight.
CONSOLE TROUBLESHOOTING
If the console does not turn on, make sure that the
power adapter is fully plugged in.
If the console displays become dim when batteries are
installed in the console, replace all the batteries at the
same time; most console problems are the result of
low batteries. See assembly step 17 on page 14 for
replacement instructions.
If the handgrip heart rate monitor does not function
properly, see step 5 on page 19.
HOW TO LEVEL THE ELLIPTICAL
If the elliptical rocks slightly on your floor during use,
turn one or both of the leveling feet beneath the rear
stabilizer until the rocking motion is eliminated.
HOW TO ELIMINATE FLEXING IN THE CENTER OF
THE ELLIPTICAL
If the elliptical flexes in the center during use, turn the
base foot (see the drawing above) until the flexing is
eliminated.
MAINTENANCE AND TROUBLESHOOTING
Leveling
Feet
Base
Foot

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ProForm SMART STRIDER and is the answer not in the manual?

ProForm SMART STRIDER Specifications

General IconGeneral
BrandProForm
ModelSMART STRIDER
CategoryElliptical Trainer
LanguageEnglish

Related product manuals