Figure 3-19: Schedule management page
Figure 3-20: System date/time settings page
1.19. LED Control
The IP Camera provides the Led Display Control function, you can enable or disable the led display/indication
on the front panel of the IP Camera device. The related settings are explained below:
1. Normal led display – select this to display all the LED Indicators on front panel.
2. Turn off led display always – select this to disable display of all the LED Indicators.
3. Turn off led display after network connected – select this will display the LED Indicators when the
Internet connection has some problem, the LED Indicators will turn off when the Internet connection
is successful.
1.20. Date/Time
The IP Camera can synchronize the date/time with the universally available time server (for example
stdtime.gov.tw) through NTP protocol. The date/time will then be corrected with the time server anytime
when the Internet is connected.
User can choose their area Time Zone to display the correct time. Certain Time Zone areas can enable or
disable the “Daylight Saving Time”. When the “Daylight Saving Time” is enabled, the start and stop time of
the Daylight Saving Time could be edited.
EN 26
To Next Page
Loading...
Need help?
General
