Protocol TERRACOPTER User Manual

01. Fine-tuning: Side-to-side Strafing [defaults to center on start-up]
02. Fine-tuning: Forward/Backward [defaults to center on start-up]
03. Fine-tuning: Turn Left/Right [defaults to center on start-up]
04. Fine-tuning: Throttle [defaults to center on start-up]
05. Throttle [defaults to zero on start-up]
06. Directional Display [defaults to center on start-up]
07. Lateral Movement to Right
08. Rearward Movement
09. Lateral movement to Left
10. Right rotational movement [defaults to zero on start-up]
11. Left rotational movement [defaults to zero on start-up]
12. High Speed Mode Active
13. Low Speed Mode Active
14. Controller Battery Level Indicator
15. Flight Mode 1 Active (Default); To change to Mode 2, press and hold Mode Switch to the right
while turning on the transmitter.
16. Remote control signal strength
17. Indicates positive communication lock with the TerraCopter
LCD Display
Antenna
Indicator Light
3D Stunt
Right function lever
(4-way directional)
Fine-tune
Forward/Backward
Mode Switch
Fine-tune
Strafe left/right
(Mode 1)
High/Low Speed
mode selector
Power Switch
Left function lever
Throttle
Fine-tune
Turn left/right
(Mode 1)
1. Install batteries carefully.
2. Do not mix old and new batteries.
3. Do not mix different types of batteries.
Remote Control
REMOTE CONTROL KEYPAD AND LCD MANUAL
2
Fine-tune
Strafe left/right
(Mode 2)
Fine-tune left/right turn
(Mode 2)

Protocol TERRACOPTER Specifications

General

Brand	Protocol
Model	TERRACOPTER
Category	Drones
Language	English