11 16BISV0903
3.3 Tools
The following tools are required to install the battery pack
Wire cutter Crimping Modular Plier Screw Driver
NOTE
Use properly insulated tool s to prevent accidental electric shock or short circuits.
If insulated tools are not available, cover the entire exposed metal surfaces of the available
tools, except their tips, with electric al tape.
3.4 Safety Gear
It is recommended to wear the following s afety gear when dealing with the battery pack
Insulated gloves Safety goggles Safety shoes
3.5Accessories
The type and quantity of the accessories are subject to the battery packing list.
NOTE
Power cable uses water-proofed AMPHENO L connectors. It must keep
pressing this Lock Button during pulling out the power plug.
To Next Page
Loading...
Need help?
General
