Page: 12
I. Pyronix Cloud
Setting up the Enforcer
Check with your Engineer that the GPRS modem has been set up to enable communication between the control panel and the cloud/app.
Please refer to 'Master Manager Menu: Set Up App', on page 24 in order to view the programming stages to set up the app.
1) Enter the Master Manager menu and scroll to 'Set Up App', and press t.
2) Press 1 to 'Enable App' and press t.
3) Make a note of the System ID. Press t. (TO USE IN STEP 1 OF CLOUD SETUP ON P13)
4) Enter a secure password (max characters =16) for the Pyronix Cloud, Press t.
(TO USE IN STEP 1 OF CLOUD SETUP ON P13)
5) Press 0 to set Security to 'Standard'. Press t.
6) Enter a secure password for the Pyronix App. Press t.
(TO USE IN STEP 3 OF APP SETUP ON PAGE 14)
7) 'Poll Server' will be displayed. Press t.
NOTE: When creating passwords, please ensure that the password uses a variety of upper case, lower case, numbers and symbols –
where applicable – to ensure the best security possible.
To Next Page
Loading...
Need help?
General
