Q'STRAINT QRT-1 Series Use And Care Manual

10
OPERATING INSTRUCTIONS
SECURING WHEELCHAIR
A
B
C
D
1. Front (QER) Electrical Retractors: (If front retractors
are not electrical follow steps 4-10.) Prior to entering
vehicle, park wheelchair behind ramp, lock wheelchair
brakes and power on Electrical Retractors (A).
2. Pull both J-Hooks, attach them to solid wheelchair
frame, power o Electrical Retractors and unlock
wheelchair brakes (B).
3. Use CAUTION as you push wheelchair up ramp and into
wheelchair Securement Zone (C). Proceed to step 7.
4. Front Mechanical Retractor/Manual Front Tiedowns:
Center wheelchair facing forward in Securement Zone
(D).
Power On
Power O

Q'STRAINT QRT-1 Series Specifications

General

Brand	Q'STRAINT
Model	QRT-1 Series
Category	Wheelchair
Language	English