Q'STRAINT QRT-1 Series Use And Care Manual

• The QER, QRT 1,3, 5, Q5000, M-Series series 4-point 4-Point Wheelchair Securement Systems and components
comply with all applicable requirements of safety regulations and standard ISO10542-1:2012, PAS2012 and UN ECE
Regulation 107, as applicable.
• QRT-1 (used with either QRT1 or QER at the front), Q-5000 & M-Series Systems are dynamically crash tested at 30mph
(48kph), 20g, using a 85kg forward facing surrogate wheelchair and a 78kg Anthropomorphic Test Device (ATD). The ATD is
restrained by both shoulder and pelvic belt restraints.
• QRT350e used with either QRT1 or QER (at the front), are dynamically tested at 30mph (48kph), 20g, using both a 85kg and
150Kg forward facing surrogate wheelchair and a 78kg Anthropomorphic Test Device (ATD). The ATD is restrained by both
shoulder and pelvic belt restraints.
• QRT550e used with either QRT1 or QER (at the front).- are dynamically tested at 30mph (48kph), 20g, using both a 85kg and
200 Kg forward facing surrogate wheelchair and a 78kg Anthropomorphic Test Device (ATD). The ATD is restrained by both
shoulder and pelvic belt restraints.
COMPLIANCE

Q'STRAINT QRT-1 Series Specifications

General

Brand	Q'STRAINT
Model	QRT-1 Series
Category	Wheelchair
Language	English