QDI Advance 6T User Manual

Manual for Advance 6T series
#"UART 2 Mode Standard Defines Serial Port 2 as standard serial port.
HPSIR Supports IrDA mode.
ASKIR Supports SHARP ASK-IR protocol with maximum
baud rate up to 57600bps.
#"IR Function Half Sets IR as half duplex.
Duplex Full Sets IR as full duplex.
#"TX, RX Inverting No, No TX, RX inverting disabled.
Enable No, Yes TX inverting disabled,RX inverting enabled.
Yes, No TX inverting enabled, RX inverting disabled.
Yes, Yes TX, RX inverting enabled.
#"Onboard Parallel 378/IRQ7 Defines onboard parallel port address and IRQ
Port 278/IRQ5 channel.
3BC/IRQ7
Disabled Onboard parallel port is disabled.
#"Onboard Parallel Normal Defines the parallel port mode as Standard Parallel
Mode EPP Port (Normal), Enhanced Parallel Port (EPP),
ECP/EPP or Extended Capabilities Port (ECP).
ECP
#"ECP Mode Use 1, 3 Sets DMA for ECP mode use.
DMA
#"Parallel Port EPP EPP1.7 Sets parallel port EPP type.
"Type EPP1.9
#" Onboard Legacy Enabled Enables onboard legacy audio, the following item
Audio to be set.
Disabled Disables onboard legacy audio.
#" Sound Blaster Enabled Enables Sound Blaster.
Disabled Disables Sound Blaster.
#"SB I/O Base 220H/240H Defines SB I/O Base Address.
Address 260H/280H
#"SB IRQ Select IRQ5~IRQ10 Selects SB IRQ .
#"SB DMA Select DMA0~DMA3 Selects SB DMA.
#"MPU-401 Enabled Enables MPU-401
Disabled Disables MPU-401
#"MPU-401 I/O 300-303H~ Defines MPU-401 I/O address.
Address 330-333H
#"Game port Enabled Enables game port.
(200-207H) Disabled Disables game port.
Chapter 3

QDI Advance 6T Specifications

General

Brand	QDI
Model	Advance 6T
Category	Motherboard
Language	English