Manual for Advance 6T series
Integrated Peripherals
Figure-7 Integrated Peripherals Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
# OnChip IDE Enabled Enables OnChip IDE First/Second Channel.
Channel 0/1 Disabled Disables OnChip IDE First/Second Channel.
# IDE Prefetch Mode Enabled Enables IDE Prefetch Mode.
Disabled Disables IDE Prefetch Mode.
#Primary/ Secondary Mode 0 ~ 4 Defines the IDE primary/secondary master/slave
Master/Slave PIO PIO mode.
Auto The IDE PIO mode is defined by auto -detection.
#Primary/ Secondary Auto Ultra DMA mode will be enabled if an ultra DMA
Master/Slave UDMA device is detected.
Disable Disables this function.
# Init Display First PCI SLOT Initializes the PCI VGA first. If a PCI VGA card
and an AGP card are installed together in the
system, the one initialized first functions.
AGP Initializes the AGP first.
# IDE HDD Block Enabled Allows IDE HDD to read/write several sectors
Mode once.
Disabled IDE HDD only reads/writes a sector once.
# Onboard FDD Enabled Onboard floppy drive controller is enabled.
Controller Disabled Onboard floppy drive controller is disabled.
# Onboard Serial 3F8/IRQ4 Defines the onboard serial port address and required
Port 1/2 2F8/IRQ3 interrupt number.
3E8/IRQ4
2E8/IRQ3
Auto Onboard serial port address and IRQ are auto-
matically assigned
Disabled Onboard serial port is disabled.
Award BIOS Description
To Next Page
Loading...
Need help?
General
