QDI Advance 6T User Manual

Manual for Advance 6T series
Power Management Setup
Figure-5 Power Management Setup Menu
The following indicates the options for each item and describes their meaning.
Item Option Description
#"ACPI function Enabled Validates ACPI function.
Disabled Invalidates ACPI function.
#" Power User Define Users can configure their own Power Management
Management Timer.
Min Saving Pre - defined timer values are used. All timers are
in their MAX values.
Max Saving Pre - defined timer values are used. All timers are in
their MIN values.
#"HDD Power 1Min~15Min Defines the continuous HDD idle time before the
Down HDD entering power saving mode (motor off).
Disable Invalidates this function.
#"Doze Mode 1Min~1Hour Defines the continuous idle time before the system
entering Doze mode.
" Disable Invalidates this function.
#"Suspend Mode 1Min~1Hour Defines the continuous idle time before the system
entering suspend mode.
Disable Invalidates this function.
#"PM Control by NO System BIOS will ignore APM when Power
APM Management is enabled.
Yes System BIOS will wait for APMs prompt before
entering any PM mode e.g. Standby or Suspend.
#" Video Off Suspend -> Off Screen blanks after the system enters suspend
Option mode.
All Modes -> Off Screen blanks after the system enters all modes.
Always On Screen is always on.
Award BIOS Description

QDI Advance 6T Specifications

General

Brand	QDI
Model	Advance 6T
Category	Motherboard
Language	English