Qlima D 720 Cube User Manual

71
4
3. handle
4. quick glance light (some units)
5. handle
6. water bucket
7. caster(some units)
8. air intake grille
9. air filter (behind the grill)
INSTALLATION INSTRUCTIONS
1. Take out the dehumidifier from the package.
2. Hold the handle and lift the dehumidifier up, pull out the power code, and rotate
90° clockwise.
3. Place the dehumidifier into the water bucket gently according to the ALIGN label
until it clicks in place. Do never install it rudely .
G
NOTE
During the operation, it is normal if you press the top cover and the dehumidifier
shakes slightly.
1.
2. 3.
STORAGE INSTRUCTIONS
1. Press in the convex piece in the water bucket.
2. Lift the dehumidifier body handle, rotate 90° clockwise.
3. install the power cord into the in-line slot, put the dehumidifier into the package to
store.
1. 2. 3.
CASTER INSTALLATION AND DISASSEMBLY INSTRUCTIONS(SOME UNITS)
Installation:
1. Attach the caster to the bottom of the unit.
2. Use a block to fix it as shown in the picture.
man_D720 Cube ('21) V3.indd 71man_D720 Cube ('21) V3.indd 71 05-07-2021 14:1605-07-2021 14:16

Qlima D 720 Cube Specifications

General

Brand	Qlima
Model	D 720 Cube
Category	Dehumidifier
Language	English