QNAP TS-210 User Manual

Chapter 3. USB One Touch Copy
System
Number of seconds (press the one touch copy button to
trigger data copy)
All NAS models 0.5 sec
Data Copy by the Front USB Port
The NAS supports instant data copy backup from the external USB device to the NAS or the
other way round by the front one touch copy button. To use this function, follow the steps
below:
1. Make sure a hard drive is installed and formatted on the NAS. The default network
share Qusb or Usb is created.
2. Turn on the NAS.
3. Configure the behavior of the Copy button on “Backup” > “USB one touch copy” page.
4. Connect the USB storage device to the front USB port of the NAS.
5. Press the Copy button. The USB LED will flash. The data will be copied to or from the
USB device according to the NAS settings.
Note: This feature adopts incremental backup. After the first time data backup, the NAS
only copies the changed files since the last backup.
20

QNAP TS-210 Specifications

General

Storage drive size	3.5 \
Storage drive capacity	0 GB
Storage drive interface	Serial ATA, Serial ATA II
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	2
Flash memory	16 MB
Internal memory	0.25 GB
Internal memory type	DDR2
Processor model	6281
Processor family	Marvell
Processor frequency	0.8 GHz
Number of processors installed	1
USB 2.0 ports quantity	3
Power supply unit (PSU) capacity	60 W
External power adapter	Yes
Fan	6cm
Dimensions (WxDxH)	85 x 218.4 x 165.5 mm
Power requirements	100-240V
Networking features	Gigabit Ethernet
Compatible operating systems	Windows 2000, XP, Vista (32/ 64 bit), Windows 7 (32/ 64 bit), Server 2003/ 2008, Mac OS X, Linux, Unix
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
LED indicators	Fan fail, HDD, LAN, Power, Status, Y
Number of fans	1 fan(s)
Cabling technology	10/100/1000BASE-T(X)
Maximum data transfer rate	1000 Mbit/s
Number of users	2048 user(s)
Security algorithms	HTTPS, SSH, SSL/TLS

Weight and Dimensions

Weight	910 g