EasyManuals Logo
Home>QNAP>Network Storage Server>TS-210

QNAP TS-210 User Manual

QNAP TS-210
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Chapter 4. LED and Alarm Buzzer Specifications
The LED indicators of the NAS indicate the system status and information. When the NAS
is turned on, check the following items to make sure the system status is normal. Note
that the following LED information is applicable only when users have properly installed the
hard drive, and connected the NAS to the network and the power supply.
LED Color LED Status Description
Flashes green
and red
alternately
every 0.5 sec
1. The hard drive on the NAS is being
formatted
2. The NAS is being initialized
3. The system firmware is being updated
4. RAID rebuilding is in process
5. Online RAID Capacity Expansion is in
process
6. Online RAID Level Migration is in process
Red
1. The hard drive is invalid
2. The disk volume has reached its full
capacity
3. The disk volume is going to be full
4. The system fan is out of function
5. An error occurs when accessing
(read/write) the disk data
6. A bad sector is detected on the hard drive
7. The NAS is in degraded read-only mode
(2 member drives fail in a RAID 5 or RAID
6 configuration, the disk data can still be
read)
8. Hardware self-test error
Flashes red
every 0.5 sec
The NAS is in degraded mode (one member
drive fails in RAID 1, RAID 5 or RAID 6
configuration)
Flashes green
every 0.5 sec
1. The NAS is starting up
2. The NAS is not configured
3. A hard disk drive is not formatted
Green The NAS is ready
System
Status
Red/
Green
Off
All the hard disk drives on the NAS are in
standby mode
21

Other manuals for QNAP TS-210

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-210 and is the answer not in the manual?

QNAP TS-210 Specifications

General IconGeneral
Storage drive size3.5 \
Storage drive capacity0 GB
Storage drive interfaceSerial ATA, Serial ATA II
Total installed storage capacity0 TB
Number of storage drives installed0
Number of storage drives supported2
Flash memory16 MB
Internal memory0.25 GB
Internal memory typeDDR2
Processor model6281
Processor familyMarvell
Processor frequency0.8 GHz
Number of processors installed1
USB 2.0 ports quantity3
Power supply unit (PSU) capacity60 W
External power adapterYes
Fan6cm
Dimensions (WxDxH)85 x 218.4 x 165.5 mm
Power requirements100-240V
Networking featuresGigabit Ethernet
Compatible operating systemsWindows 2000, XP, Vista (32/ 64 bit), Windows 7 (32/ 64 bit), Server 2003/ 2008, Mac OS X, Linux, Unix
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
LED indicatorsFan fail, HDD, LAN, Power, Status, Y
Number of fans1 fan(s)
Cabling technology10/100/1000BASE-T(X)
Maximum data transfer rate1000 Mbit/s
Number of users2048 user(s)
Security algorithmsHTTPS, SSH, SSL/TLS
Weight and Dimensions IconWeight and Dimensions
Weight910 g

Related product manuals