QNAP TS-210 User Manual

Warning: The NAS supports replacing the redundant power supply unit without
turning off the server when redundant power supply mode is enabled. However, users are
strongly recommended to turn OFF the NAS before replacing the power supply unit to
reduce the risk of electric shock.
A second power supply unit can be installed on a single power (SP) rackmount NAS model
to upgrade the SP model to redundant power (RP) model.
10.2 2U Turbo NAS (TS-1279U-RP and TS-EC1279U-RP only)
T
he following instructions should only be performed by an authorized and trained
technician.
To replace a failed power supply unit on the TS-1279U-RP or TS-EC1279U-RP Turbo NAS,
follow the steps below.
1. Turn off the NAS.
2. Hold the black handler and press and hold the green button firmly.
52

QNAP TS-210 Specifications

General

Storage drive size	3.5 \
Storage drive capacity	0 GB
Storage drive interface	Serial ATA, Serial ATA II
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	2
Flash memory	16 MB
Internal memory	0.25 GB
Internal memory type	DDR2
Processor model	6281
Processor family	Marvell
Processor frequency	0.8 GHz
Number of processors installed	1
USB 2.0 ports quantity	3
Power supply unit (PSU) capacity	60 W
External power adapter	Yes
Fan	6cm
Dimensions (WxDxH)	85 x 218.4 x 165.5 mm
Power requirements	100-240V
Networking features	Gigabit Ethernet
Compatible operating systems	Windows 2000, XP, Vista (32/ 64 bit), Windows 7 (32/ 64 bit), Server 2003/ 2008, Mac OS X, Linux, Unix
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
LED indicators	Fan fail, HDD, LAN, Power, Status, Y
Number of fans	1 fan(s)
Cabling technology	10/100/1000BASE-T(X)
Maximum data transfer rate	1000 Mbit/s
Number of users	2048 user(s)
Security algorithms	HTTPS, SSH, SSL/TLS

Weight and Dimensions

Weight	910 g