QNAP TS-433 User Manual

5. NAS Migration
You can migrate data and settings from your current NAS to another NAS model with minimal disruptions
by installing all the hard drives from the source NAS to the destination NAS. RAID conguration and other
settings are retained on the destination NAS after migration.
NAS Migration Requirements
You can only migrate drives to specic NAS models, depending on your source NAS. For the list of NAS
models compatible with direct NAS migration, see https://www.qnap.com/go/nas-migration.
Your device must meet the following requirements:
• QTS NAS supports several types of NAS migration:
• ARM NAS to an ARM NAS
• x86 NAS to an x86 NAS
• ARM NAS to an x86 NAS
Note
You cannot migrate from an x86 NAS to an ARM NAS.
• The destination NAS must run on the same QTS version as the source NAS (or later).
• The destination NAS must have sucient free drive bays to accommodate all the drives that you are
migrating from the source NAS.
For NAS models that do not support NAS migration, you can migrate existing data using HBS 3. For details,
see Migrating NAS Data Using HBS 3.
Status and Setting Changes after NAS Migration
The status of NAS data and settings varies after migration.
Data and Settings After NAS Migration
Registered myQNAPcloud name Your registered myQNAPcloud name is not migrated.
Encrypted disk volumes If the NAS does not support le system encryption,
encrypted disk volumes are not migrated.
Warning
To prevent data loss, back up and save the
encryption keys of encrypted disk volumes in
a safe place. You can also choose to decrypt
disk volumes before migration.
TS-433 User Guide
NAS Migration 31

QNAP TS-433 Specifications

General

Type	NAS
Device class	Home & Home Office
Share folder	AFP, CIFS/SMB, FTP, File Station
Backup features	Cloud
Backup function	Yes
Browser supported	Apple Safari (latest version) Google Chrome (latest version) Microsoft Edge (latest version) Mozilla Firefox (latest version)
Security algorithms	HTTPS, SSH
RAID levels	0, 1, 5, 6, 10, JBOD
Storage drive size	2.5/3.5 \
Storage drive capacity	0 GB
Storage drive interface	Serial ATA
Storage drives installed	No
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Maximum supported storage capacity	308 TB
Number of storage drives installed	0
Number of storage drives supported	4
Operating system version	5.0.0
Operating system installed	QNAP Turbo System
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey
Linux operating systems supported	CentOS 7.0, SuSE Linux 12.0, SuSE Linux 12.3, SuSE Linux 15, Ubuntu 14.04
Other operating systems supported	IBM AIX 7.1, IBM AIX 7.2, Solaris 10, Solaris 10 SPARC, Solaris 11, Solaris 11 SPARC
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 11, Windows 7, Windows 8
Processor model	Cortex-A55
Processor family	ARM
Processor frequency	2 GHz
Processor manufacturer	-
Flash memory	4000 MB
Internal memory	4 GB
Chassis type	Tower
Cooling type	Active
Fan diameter	120 mm
Product color	White
LED indicators	HDD, LAN, System, USB
Number of fans	1 fan(s)
Cable lock slot type	Kensington
Concurrent connections	200
USB 2.0 ports quantity	2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Fan voltage	12 V
AC input voltage	100 - 240 V
Power supply location	Built-in
Power consumption (sleep)	8.45 W
Power consumption (typical)	22.54 W
Power supply unit (PSU) capacity	90 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Ethernet LAN data rates	100, 1000, 2500 Mbit/s
Supported network protocols	IPv4, IPv6
Cables included	AC, LAN (RJ-45)
Number of screws	28

Weight and Dimensions

Depth	160 mm
Width	169 mm
Height	219 mm
Weight	2070 g
Package weight	3500 g