QNAP TS-h973AX User Manual

• To avoid potential injury or damage to components, ensure that the drives and other internal system
components have cooled before touching them.
• Observe electrostatic discharge (ESD) procedures to avoid potential injury or damage to components.
Power
• To reduce the risk of fire or electric shock, ensure that you only connect the power cord to a properly
grounded electrical outlet.
•
Devices with redundant power supply may have one or more power supply unit (PSU) cords. To avoid
serious injuries, a trained service technician must disconnect all PSU cords from the device before
installing or replacing system components.
System Battery
• To avoid potential battery explosion, causing injury or damage to components, ensure that you replace
the existing battery with a battery of the same type.
• Dispose of used batteries properly according to local regulations or the instructions of the battery
manufacturer.
Moving Parts
•
Moving fan blades: Keep your body parts away from moving fan blades while the device is connected
to a power source.
•
Moving components: Keep your body parts away from other moving components.
Installation Requirements
Category Item
Environment • Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
• Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface without exposure to direct sunlight, liquids,
or chemicals
• Free from objects that may obstruct NAS ventilation or apply
pressure to the NAS or power cord
TS-h973AX User Guide
Product Overview 10

QNAP TS-h973AX Specifications

General

RAID levels	0, 1, 5, 6, 10, 50, 60, JBOD
RAID support	Yes
Storage drive capacity	0 GB
Supported file systems	FAT32, HFS+, NTFS, ZFS, exFAT, ext3, ext4
Storage drive interface	-
Storage drives installed	No
Storage drive sizes supported	2.5, 3.5 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	9
Supported storage drive interfaces	Serial ATA II, Serial ATA III
Processor cores	4
Processor model	V1500B
Processor family	Ryzen Embedded
Processor frequency	2.2 GHz
Processor manufacturer	AMD
Operating system version	h5.0.0
Operating system installed	QuTS hero
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Type	NAS
Device class	Home & Home Office
Share folder	AFP, CIFS/SMB, FTP, WebDAV
Backup features	Cloud, iSCSI LUN
Number of users	2000 user(s)
Browser supported	Safari, Chrome, Internet Explorer, Firefox
Security algorithms	256-bit AES, FIPS 140-2, HTTPS, SSH, SSL/TLS
Flash memory	5000 MB
Memory slots	2
Internal memory	8 GB
Memory form factor	SO-DIMM
Internal memory type	DDR4
Maximum RAM supported	64 GB
Fan voltage	12 V
AC input voltage	100 - 240 V
Power supply location	External
Number of power supply units	1
Power consumption (HDD standby)	41.2 W
Power supply unit (PSU) capacity	120 W
Ethernet LAN data rates	100, 1000, 2500, 5000, 10000 Mbit/s
Ethernet LAN data rate supported (max)	10000 Mbit/s
Ethernet LAN (RJ-45) ports	3
Cables included	AC, LAN (RJ-45)
Number of screws	56
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Chassis type	Tower
Cooling type	Active
Fan diameter	140 mm
Product color	Black
LED indicators	HDD, LAN, Power, SSD, Status, USB
Number of fans	1 fan(s)
Cable lock slot type	Kensington

Weight and Dimensions

Depth	224.1 mm
Width	224.6 mm
Height	182.65 mm