QTech QSR-2920 Series User Manual

Installation Manual
4. Power on and Run Router 45
www.qtech.ru
Figure 4-17 Connect the optical fiber
Step 5:
Connect the other side of the fiber to the peer router.
 If the optical interface is not inserted with the SFP module, cover the dust
cap of the optical interface. The dust cap of the optical interface is
delivered with the router. The dust cap of the optical interface is installed,
as shown in Figure 4-18.
Figure 4-18 Install the dust cap of the optical interface
4.3. Hardware Management
This section describes various hardware management functions of the QSR-2920 series router.
With the function interfaces, the user can conveniently view the software and hardware
version information of the QSR-2920 series router, as well as the work status information of
the hardware modules.
 The printed information involved in this section is just for reference. Actual
information will prevail.

QTech QSR-2920 Series Specifications

General

Brand	QTech
Model	QSR-2920 Series
Category	Network Router
Language	English