QTech QSW-8200 series User Manual

USER MANUAL
www.qtech.ru

QTech QSW-8200 series Specifications

General

Brand	QTech
Model	QSW-8200 series
Category	Switch
Language	English

Summary

Chapter 1 INTRODUCTION

1.1 Overview

General introduction to QSW-8200 series ethernet switches, their purpose and benefits.

1.2 Introduction to Product

Details QSW-8200 series switches, their types and variants.

1.2.1 Product Overview

Comprehensive overview of QSW-8200 series switches and their models.

1.2.2 Features and Benefits

Key features like interfaces, power, and 10Gb Ethernet.

Networking Protocols

Supported network protocols like 802.1d/w/s, IPv6.

ACL

Access Control List policies for traffic classification and security.

QoS

Quality of Service features for bandwidth and traffic management.

Perfect Web Management

Management features via SNMP, CLI, WEB, and LinkManager.

1.3 Physical Specifications

1.4 Description of Hardware

1.4.1 Front Panel

Describes front panels of various QSW-8200 switch models.

1.4.2 Back Panel

Describes back panels of various QSW-8200 switch models.

1.4.3 DC Power/PoE Power Input

Details pin-outs for DC and PoE power input.

1.4.4 Status LEDs

Explains port LEDs for link state and PoE status.

System LEDs

Describes system LEDs for monitoring status.

1.4.5 Front Panel Interface Description

Details RJ-45 and SFP interface descriptions.

1.4.6 QSW-2SFP+ / QSW-2GB Extended Module Description

Describes 10Gb extended modules.

10Gb extended module LED description

Explains LEDs for 10Gb extended modules.

Chapter 2 HARDWARE INSTALLATION

2.1 Installation Notice

General guidelines for proper operation and physical security.

2.1.1 Environmental Requirements

Specifies environmental conditions like temperature, humidity, dust.

2.1.1.1 Dust and Particles

Details recommended limits for dust diameter and density.

2.1.1.2 Temperature and Humidity

Recommended temperature and humidity ranges for optimal performance.

2.1.1.3 Power Supply

Instructions for proper power supply connection, grounding, UPS.

2.1.1.4 Preventing Electrostatic Discharge Damage

Guidelines to prevent ESD damage.

2.1.1.5 Anti-interference

Advice on minimizing interference from external sources.

2.1.1.6 Rack Configuration

Guidance on mounting the switch in a 19" rack.

2.1.2 Installation Notice

General notices for installation, tool usage, and site prep.

2.1.3 Security Warnings

Safety warnings for handling and operation.

2.2 Installation Preparation

Steps for preparing installation, package verification, tools.

2.2.1 Verify the Package Contents

Instructions to unpack and check package contents.

2.2.2 Required Tools and Utilities

Lists necessary tools for installation.

2.3 Installation Guide

General guide for installing the switch.

2.3.1 Installing the Switch

Shows installation sketch maps for mounting the switch in a rack.

2.3.2 Connecting Console

Procedure for connecting to the switch via console port.

2.3.3 SFP Transceiver Installation

Step-by-step guide for installing SFP transceivers.

2.3.4 QSW-2SFP+ extended module Installation

Instructions for installing QSW-2SFP+ modules.

2.3.5 QSW-2GB Extended module Installation

Instructions for installing QSW-2GB modules.

2.3.6 Copper Cable/Fiber Cable Connection

How to connect copper and fiber cables.

2.3.7 AC Power Supply Connection

Procedure for connecting to AC power.

2.3.8 DC Power Supply Connection

Procedure for connecting to DC power.

2.3.9 PoE Power Supply Connection

How to connect external PoE power.