18 Installing and Configuring the SKM KVM Servers
Quantum Scalar Key Manager 2.5 Quick Start Guide
• The SKM server must have IP connectivity through any firewalls to all Quantum
libraries using the SKM appliance server to obtain encryption keys.
• SKM uses TCP ports 80, 6000 and 6001 for SKM server communication. These ports
must all be open on your network in a bi-directional mode in order for SKM
communication between the SKM servers and libraries to work.
Deploying the .raw
Image on KVM
Follow the instructions below for both SKM VM servers. The .raw installation process is
performed via QEMU-KVM.
1 Insert the
Scalar Key Manager VM Installation CD
into the your computer’s CD ROM
drive.
2 Decompress the .raw.bz2 image file to a known location. You may copy the image
to a shared network drive for faster deployment if you wish.
For example: bunzip2 5-01071-01_220Q.GC00300.raw.bz2
3 Launch QEMU-KVM.
4 Log on to the VM host.
5 Under the local host, right-click and select New.
The New VM wizard opens.
Scalar i500 570G
Scalar i2000 595A
Scalar i6000 600A
Scalar i3
Note: Requires SKM 2.4 (240Q) or
later
110G
Scalar i6
Note: Requires SKM 2.4 (240Q) or
later
110G
Library Minimum Firmware Required
To Next Page
Loading...
Need help?
General