Quantum Scalar i80 Quick Start Guide

Installing TLS Certificates on the SKM Server for SKM 2.4 (240Q) or Later 37
Scalar Key Manager 2.5
2 Onscreen messages provide status as the Quantum certificate bundles are generated
using the default values, so no user input is required. (The generated bundle files are
saved at
/home/akmadmin/generatedcerts/qbundles.)
After bundle generation is complete, load the bundles listed on the screen onto the
library and SKM servers using the user interface.
•The TapeLibraryQKMCert_xxxxxxxxxx.tgz bundle may be loaded onto any
library attached to the SKM server pair.
•The QKMPrimaryServerCert_xxxxxx.tgz bundle must be loaded onto the
primary SKM server.
•The QKMSecondaryServerCert_xxxxxxx.tgz bundle must be loaded onto the
secondary SKM server.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g