Quantum Scalar i80 Quick Start Guide

Configuring Your Library For SKM 39
Scalar Key Manager 2.5
4 Configure the SKM server IP addresses on the library.
a From the library’s Web client, navigate to the encryption system configuration
screen.
b Enter the primary and secondary SKM server IP addresses or host names in the
fields provided.
c Click Apply.
5 Run EKM Path Diagnostics and make sure all the tests pass. Pass/fail status is
displayed in a progress window after the diagnostics completes (see
Figure 12). This
is required to make sure the library is connected properly to both SKM servers. If any
of the tests fail, follow the instructions in the online help or library user’s guide to
troubleshoot and then run EKM Path Diagnostics again.
Figure 12 EKM Path
Diagnostics PASSED Window
6 Configure SKM partitions and generate data encryption keys:
a On the library’s Web client, navigate to the encryption partition configuration
screen.
b For each partition in which you will use SKM, in the Encryption Method drop-
down list, select Enable Library Managed.
c Click Apply.
Data encryption keys are generated. When you enable library managed
encryption on a partition in the library for the first time, the library
automatically triggers each SKM server to generate a set of unique data
encryption keys. The key generation process should take 30 minutes or less to
complete, depending on network performance. The library notifies you when
the process is complete.
d Wait for the process to complete before continuing to the next step.
7 Save the library configuration.
8 Proceed to Backing Up the Servers on page 43.

Quantum Scalar i80 Specifications

General

Power supply type	AC
Power requirements	100 – 240V, 50/60Hz
Power consumption (typical)	200 W
Dimensions (WxDxH)	445 x 793 x 264 mm
Media types supported	2x LTO-4
Maximum supported storage capacity	128 TB
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Media type	Tape Cartridge
Form factor	6U
Product type	Storage auto loader & library
Certification	IEC 60950, Class A / FCC part 15, ICES-003, CISPR 22, EN55022 Class A, VCCI, CNS 13438, KN22, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3 EN55024, KN24 CE, VCCI, GS, FCC, ICES, NRTL, GOST, BSMI, KCC
Product color	Black
Standard interfaces	Fiber Channel

Weight and Dimensions

Weight	23800 g