GNSS Module Series
L80&L80-R&L86&LC86L EVB User Guide
L80&L80-R&L86&LC86L_EVB_User_Guide 15 / 30
Table 4: Status Indication LEDs
1.
1)
L80-R does not support active antenna detection interface, so D307 is invalid for this module.
2. D305 and D306 LEDs are not supported by any of the applicable modules.
3.5. Test Points
The following figure illustrates the EVB test points.
Figure 8: GNSS EVB Test Points (J401)
Flash: successful position fix. The frequency is 1 Hz.
Extinct: no position fix.
Flash: Data output from TXD pin.
Extinct: No data output from TXD pin.
Bright: EVB uses the external active antenna.
Extinct: EVB uses the internal patch antenna.