GNSS Module Series
L80&L80-R&L86&LC86L EVB User Guide
L80&L80-R&L86&LC86L_EVB_User_Guide 7 / 30
1 Introduction
In this document you can find the information on how to use the evaluation board (EVB) to develop and
test Quectel L80, L80-R, L86, and LC86L modules.
1.1. Safety Information
The following safety precautions must be observed during all phases of operation, such as usage, service
or repair of any terminal incorporating Quectel L80, L80-R, L86 and LC86L modules. Manufacturers of the
terminal should distribute the following safety information to users and operating personnel and include
these guidelines into all manuals supplied with the product. Otherwise, Quectel assumes no liability for
customers’ failure to comply with these precautions.
Ensure that the use of the product conforms to the national safety and
environmental regulations, and is allowed to be used in the country and in the
required environment.
Keep away from explosive and flammable materials. The use of electronic
products in extreme power supply conditions and locations with potentially
explosive atmospheres may cause fire and explosion hazards.
The product must be powered by a stable voltage source. Additionally, the wiring
must conform to security and fire prevention regulations.
Proper ESD handling procedures must be applied throughout the mounting,
handling and operation of any application that incorporates the module to avoid
ESD damages.
To Next Page
Loading...
Need help?
General
