Mod. 03004 - 06004
16
QUICK MILL
Fault Type of fault Solution
Machine does not work (go on) Electrical Connect the machine
to the mains
Electrical Check the fuses
Minimum or no coffee dispensed Hydraulic Refil water tank
Hydraulic Descale the machine
Hydraulic Replace the lime filter
Hydraulic Clean filters
Hydraulic Reduce the amount of coffee
in the filter holder
Hydraulic Coffee grind is too fine
Too much coffee dispensed Hydraulic Increase the amount of coffee
Hydraulic in the filter holder
Hydraulic Coffee grind is too coarse
Coffee leaking from the Hydraulic Insert the filter holder
dispensing unit in its seat
Hydraulic Clean the edge of
the filter holder
Hydraulic Filter holder seal worn,
replace it
Hydraulic Reduce the amount of coffee
in the filter holder
Cold coffee in the cup Electrical Wait for the light to go out
Hydraulic Insert the filter holder
to warm-up
Noisy pump Hydraulic Refil water tank
Idraulica Check if the suction
tube is blocked
11 TROUBLESHOOTING