OWNER S MANUAL
,
OBD2 CODE SCANNER
20
9). If the Service Reset Failed message appears then there mig ht be
problems for the scan tool to communicate with the vehicle being tested.
Refer to the vehicle service manual for more information.
10). When done, turn off the ignition and disconnect the scan tool.
4. Warranty and Service
4.1 Limited One Year Warranty
The Manufacturer warrants to the original purchaser that this product is free
of defects in materials and workmanshi p for a period of one (1) year from the
date of original purchase, subject to the following terms and conditions:
1). If the product fails within the one (1) year period, it will be repaired or
replaced, at the manufacturer's option, at no charge with proof of original
purchase. The sales recei pt may be used for this purpose.
2). This warranty does not apply to damages caused by improper use,
accident, flood, lig htning, etc., or if the product was altered or repaired by
anyone other than the manufacturer's service team.
3). Manufacturer shall not be liable for any incidental or consequential
damages for breach of any written warranty of this unit. This warranty gives
you specific legal rig hts, and you may also have rig hts which vary from state
to state. This warranty is not transferable.
4). All information in this manual is based on the latest information available
at the time of publication and no warranty can be made for its accuracy or
completeness. Manufacturer reserves the rig ht to make changes at any time
without notice.
4.2 Service Procedures
For technical support and information on
Updates
and
Optional
Accessories
, please contact your local store or distributor. If it becomes
necessary to return the code reader for repair, contact your local distributor
for more information.
To Next Page
Loading...
Need help?
General