Quicksilver 675SD — System & Component Overview and Operaon
26
16. Ski Pole (oponal)
Your boat may come equipped with an oponal ski pole for water skiing. To use, remove the ski pole
deck plate, located on centerline in front of the motorwell. The ski pylon slides into the deck plate and
connects to the ski tow base, located in the bilge.
The ski tow deck plate has rubber O-ring gaskets to minimize the amount of water that could
potenally enter the bilge. Quicksilver® suggests that prior to installing or removing the ski pylon,
spray water on the ski pole to help slide it through the deck plate.
When the ski pole is not in use, it can be stored inside the a bench seat.
The ski pylon is only used for water skiing or wakeboarding. If you are tubing or engaging in other
recreaonal towing, Quicksilver® recommends that you aach the tow rope to the stern eyes at the
transom of your boat.
Leaning post lid
Leaning post base
Footrest
Leaning post cushion
12v electric cooler
Breaker panel
Leaning Post
Ski pylon
Deck plate
Stern eyes
Ski pole base
Ski Pole