To Next Page

To Previous Page

Safety Information

R&S

RTC1000

6Getting Started 1335.7346.02 ─ 06

An unsuitable operating site or test setup can damage the instrument and con-

nected devices. Ensure the following operating conditions before you switch on

the instrument:

●

Read and observe the "Basic Safety Instructions" brochure and the safety

instructions in the manuals.

●

Observe the operating conditions specified in the data sheet. Note that the

general safety instructions also contain information on operating conditions.

●

Position the instrument as described in the following sections.

Make sure that all fan openings are unobstructed and the airflow perforations

are unimpeded. The minimum distance from the wall is 10 cm.

●

Signal levels at the input connectors are all within the specified ranges.

●

Signal outputs are correctly connected and are not overloaded.

1.2 Korea Certification Class A

이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하

시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.

Korea Certification Class A

Questions and Answers:

Need help?

Do you have a question about the R&S RTC1002 and is the answer not in the manual?

R&S RTC1002 Specifications

General