18 Raymarine Automatic Identification System Receiver
If your own boat’s position is lost the display will disable the AIS
functionality and will display the ‘No AIS’ icon.
Once your own boat’s position returns and the AIS display is
switched on, the display will re-enable the AIS function.
3.4 Setting up AIS
The AIS Layer Setup Menu enables you to:
• Select the target types displayed (ALL or DANGEROUS)
• Switch the display of AIS safety messages ON/OFF.
• View the list of active AIS unit alarms.
To display the AIS Layer Setup Menu:
Note: (Ensure the AIS unit is operational and has a fix).
1.Press MENU. The Setup dialog box
appears.
2.Press trackpad Up/Down to highlight
AIS Layer Setup.
3.Press trackpad Right. The AIS Layer
Setup dialog box appears.
4. Press trackpad Up/Down to highlight feature.
5. Press trackpad Right. The feature options appear.
6. Press trackpad Up/Down to change feature option.
7. Press OK. The selection is accepted.
No AIS targets are being received.
AIS targets are being received
AIS targets are within range with active alarm.
AIS targets are within range but dangerous and lost
target alarm is OFF.
Setup
Chart Setup...
Cartography Setup...
GPS Status...
Compass Setup...
AIS Layer Setup
AIS Layer Setup
AIS Safety Messages ON
AIS Alarms List...
To Next Page
Loading...
Need help?
General
