Set-up and Calibration
23
S15 Waypoint Arrival Alarm
Sets the display to alarm if a Waypoint Arrival Alarm is issued
by the GPS.
The options are: On/Off.
3.5 Calibration Page Description
In each case press the button quickly to edit, press the or
to change units and press the button quickly to select the
chosen units. Default values are indicated in bold.
SETUP SPEED - Speed Chapter
S16 Speed Response
Sets the update period of the Speed display.
The options are: Auto/Slow/Medium/Fast
S17 Speed Calibration
The boat speed calibration factor adds a percentage factor
which corrects the information from the paddlewheel and
ensures the boat speed is displayed correctly.
See page 30 section 4.2 for the calibration procedure.
S18 Speed Display Format
Sets the number of decimal places to which the boat speed
information is displayed.
Applies to the units selected on page 21 s6.
The options are 0.1 or 0.01.
S19 Sea Temperature calibration
The sea temperature calibration factor adds a value which
corrects the information from the temperature sensor and
ensures the water temperature is displayed correctly.
www.raymarine.com
To Next Page
Loading...
Need help?
General